manualshive.com logo in svg

Dell External OEMR R210II, Owner'S Manual

Share
Download
Dell External OEMR R210II Owner'S Manual Download Page 62

62

Installing System Components

Installing an Expansion Card

 

CAUTION: 

Many repairs may only be done by a certified service technician. You 

should only perform troubleshooting and simple repairs as authorized in your 
product documentation, or as directed by the online or telephone service and 
support team. Damage due to servicing that is not authorized by Dell is not covered 
by your warranty. Read and follow the safety instructions that came with the 
product.

1

Unpack the expansion card and prepare it for installation.
For instructions, see the documentation accompanying the card.

2

Turn off the system, including any attached peripherals, and disconnect 

the system from the electrical outlet.

3

Open the system. See "Opening the System" on page 50.

4

Lift and rotate the expansion-card latch and remove the filler bracket. See 

Figure 3-8.

5

Holding the expansion card by its edges, position the card so that the card-

edge connector aligns with the expansion-card connector on the 

expansion-card riser.

6

Insert the card-edge connector firmly into the expansion-card connector 

until the card is fully seated.

7

Close the expansion-card latch. See Figure 3-8.

book.book  Page 62  Monday, March 7, 2011  2:24 PM

Summary of Contents for External OEMR R210II































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands