Dell External OEMR R210, Hardware Owner'S Manual

Page: 71 / 144

Installing System Components
73
Figure 3-7. Installing or Removing an Expansion Card
8
Connect any cables to the expansion card.
9
Close the system. See "Closing the System" on page 63.
10
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals
Removing an Expansion Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 62.
1 expansion-card latch 2 expansion card
3 expansion-card riser
3
2
1
book.book Page 73 Wednesday, August 12, 2009 4:51 PM