Dell External OEMR R210, Hardware Owner'S Manual, Page: 31 / 144

About Your System
33
Warning: Control
Panel is not
installed.
The control panel is not
installed or has a faulty cable
connection. Install the control panel, or
check the cable connections
between the display module,
the control panel board, and
the system board. See
"Control Panel Assembly" on
page 101.
Warning! No
micro code
update loaded
for processor n.
Micro code update failed. Update the BIOS firmware.
See "Getting Help" on
page 133.
Warning!
Performance
degraded. CPU
and memory set to
minimum
frequencies to
meet PSU
wattage. System
will reboot.
The system configuration of
processor, memory modules,
and expansion card may not
be supported by the power
supplies. If any system components
were just upgraded, return
the system to the previous
configuration. If the system
boots without this warning,
then the replaced
component(s) are not
supported with this power
supply. See "Power Supply"
on page 97.
Warning!
Unsupported
memory
configuration
detected. The
memory
configuration is
not optimal. The
recommended
memory
configuration
is: <message>
Invalid memory
configuration. The system
will run but with reduced
functionality. Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 79. If the problem
persists, see
"Troubleshooting System
Memory" on page 116.
Message Causes Corrective Actions
book.book Page 33 Wednesday, August 12, 2009 4:51 PM