manualshive.com logo in svg

Dell External OEMR 1435, User Manual

Share
Download
Dell External OEMR 1435 User Manual Download Page 81

Using the BMC Management Utility

81

Figure 3-15.

SOL Proxy Main Menu

 Example

The SOL Proxy main menu allows you to change the SOL settings of a 
remote managed system’s BMC, reboot the remote BMC, or activate console 
redirection. 
When you select menu option 1, 

Connect to the Remote Server’s BMC

, you 

are prompted for the BMC IP address and BMC login. After you enter the 
required information and make a successful connection, the internal state 
SLP is changed to “connected.” If you select menu options 2, 3, or 4, and the 
application state is not “connected,” you are prompted to connect to a BMC.
Menu option 2 allows you to enable, disable, and configure the SOL defaults, 
including the minimum user privilege level required for activating SOL and 
the communication baud-rate.
Menu options 3 and 4 allow you to establish a SOL remote console session 
through the SOL Proxy main menu. Menu option 3 establishes a SOL session 
without changing the remote system’s state. This option is ideal for connecting 
to the Microsoft SAC/EMS or the Linux console. Menu option 4 reboots the 
remote managed system and establishes a SOL session. This option is best 
suited for performing BIOS setup and system configuration tasks.

Summary of Contents for External OEMR 1435





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands