manualshive.com logo in svg

Dell External OEMR 1435, User Manual

Share
Download
Dell External OEMR 1435 User Manual Download Page 31

Configuring Your Managed System

31

Table 2-1.

Remote Access Configuration Utility

Option

Description

IPMI Over LAN

Enables or disables the out-of-band LAN channel access 
to the shared network controller.

NIC Selection

NOTE: 

This option is 

available only on Dell 
PowerEdge 

x9xx 

and 

xx0x

 

systems.

Displays the configuration option.

• Shared

Select this option to share the network interface with 
the host operating system. The remote access device 
network interface is fully functional when the host 
operating system is configured for NIC teaming.

The remote access device receives data through NIC 1 
and NIC 2, but transmits data only through NIC 1.

If NIC 1 fails, the remote access device will not be 
accessible.

NOTE: 

The NIC 2 is not available on the PowerEdge 

1900 system.

• Failover

Select this option to share the network interface with 
the host operating system. The remote access device 
network interface is fully functional when the host 
operating system is configured for NIC teaming.

The remote access device receives data through NIC 1 
and NIC 2, but transmits data only through NIC 1. 
If NIC 1 fails, the remote access device fails over to 
NIC 2 for all data transmission.

The remote access device continues to use NIC 2 for 
data transmission. If NIC 2 fails, the remote access 
device fails over all data transmission back to NIC 1.

NOTE: 

This option cannot be selected on the 

PowerEdge 1900 system.

Summary of Contents for External OEMR 1435





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands