manualshive.com logo in svg

Dell External OEMR 1435, User Manual

Share
Download
Dell External OEMR 1435 User Manual Download Page 69

Using the BMC Management Utility

69

sel clear

Description

This command displays the system event log information, displays the contents 
of the event log, and deletes all the event log records. See Figure 3-10.

Subcommands

•

status

 — Displays the total number of system event log records.

•

get

 — Prints all or part of the event log.

•

clear

 — Deletes all the records in the event log.

Options

-begin 

index1

Specifies the first record to display.

-end   

index2

Specifies the last record to display.

-max 

count

Specifies the maximum number of records to display.
If the value of the argument 

count

 is bigger than the total number of the 

records, the last record displayed will be the last one in the event log.

-last 

n

Specifies the number of records to be displayed, starting from the last record 
and counting backwards. 

Default Subcommand 

If a subcommand is not specified, this command acts the same as 

sel status

.

Display Format

System event log records are displayed using either a tabular format (legacy) 
or a vertical format (oemlist) consistent with the SEL log output found in 
other Dell OpenManage products. The default is the oemlist format. The 
column headers for the legacy format are: 

Ordinal Number

, 

Date

, 

Time

, 

Sensor Number

, 

Sensor Type

, and 

Brief Description

. See Figure 3-10 for an 

example of oemlist and legacy formatted SEL display.

Summary of Contents for External OEMR 1435





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands