manualshive.com logo in svg

Dell External OEMR 1435, User Manual

Share
Download
Dell External OEMR 1435 User Manual Download Page 109

BMC Management Utility Error Codes

109

 

 

First index larger than 
total SEL records.

The first index is larger 
than the total SEL 
records.

 

A8h

H/W or F/W 
errors.

Unsupported 
command.

Unsupported 
operation.

0xC1

 

 

Sensor not present.

Request sensor, data, or 
record not present.

0xCB

  

Sensor 

command 

error.

Command illegal for 
specified sensor or 
record type. 

0xCD

  

Firmware 

error.

Command 

response 

could not be provided. 

0xCE

 

Destination error.

Cannot deliver request 
to destination. 

0xD3

 

Device error.

Device specific (OEM) 
errors. 

0x01–0x
7E

A9h

Processing 
errors 
(transient 
errors that 
may disappear 
upon retry of 
command).

BMC busy.

BMC out of processing 
resources.

0xC0

  

Destination 

timeout 

error.

BMC timeout while 
processing command 

0xC3

 

 

BMC out of storage 
space.

BMC out of storage 
space required to 
process command.

0xC4

  

Invalid 

reservation 

ID. Invalid reservation ID.  0xC5

  

Duplicate 

command. Cannot 

execute 

duplicated request. 

0xCF

Table A-1.

BMC Management Utility Error Codes 

(continued)

Code

Classification

Message

Description

IPMI 
Error

Summary of Contents for External OEMR 1435





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands