Figure 100. Installing GPU on GPU riser module
Next steps
1. If removed, install the NVLInk bridges.
2.
.
3. If removed, install the NVLink sponges.
4. Follow the procedure listed in
After working inside your system
.
Removing the GPU riser module card holders
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
3.
.
NOTE:
Your system has either half height (HH) or full height (FH) or without GPU card holder, which is based on the type
of GPU card used.
Steps
Loosen the captive screw and pull out the HH or FH GPU card holder form the GPU riser module.
Figure 101. Removing the HH card holder
94
Installing and removing system components
