Figure 44. Installing the rear mounting front PERC module
Next steps
1. Connect all the cables to rear mounting front PERC module.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2.
Replace the drive backplane cover
.
3. Follow the procedure listed in
After working inside your system
.
Drive backplane
Drive backplane
Depending on your system configuration, the drive backplane supported is listed here:
Table 13. Supported backplane options
System
Supported hard drives options
XC Core XC750xa
2.5-inch (x 8) Universal backplane
Figure 45. 8 x 2.5-inch universal drive backplane
1. BP_PWR_CTRL
2. BP_DST_SA1 (PERC to backplane)
Installing and removing system components
49