Figure 58. Removing the retaining clip
Next steps
.
Installing the processor
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
3.
.
4. Remove the processor heat sink module or remove the liquid cooling module.
Steps
1. Place the processor in the processor tray.
NOTE:
Ensure the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Place the retaining clip on top of the processor in the processor tray aligning pin 1 indicator on the processor.
NOTE:
Ensure the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing the
retaining clip on the processor.
NOTE:
Before you install the heat sink, ensure to place the processor and retaining clip in the tray.
66
Installing and removing system components
