Dell EMC VxFlex Ready Node 13G, Hardware Installation Manual

Page: 64 / 82

Install the static chassis rails on the server
This procedures describes installation of the static chassis rails on the server.
CAUTION
The server is heavy and should be handled by two people. To avoid personal injury
and/or damage to the equipment, do not attempt to handle the server without a
mechanical lift and/or help from another person.
Procedure
1. Place the server on a level surface and align the keyhole slots on the chassis
rails with the pins on the server (1).
2. Slide the chassis rails toward the back of the server until they lock into place.
To remove the chassis rails, lift the lock spring until it clears the pin and slide
the chassis rails toward the front of the server until the pins can slip through
the keyhole slots (2).
Figure 26 Installing static chassis rails
Install the server in the cabinet
This procedures describes installation of the server in the cabinet.
CAUTION
The server is heavy and should be installed in a cabinet by two people. To avoid
personal injury and/or damage to the equipment, do not attempt to install the
server in a cabinet without a mechanical lift and/or help from another person.
2U1N Configuration Equipment Installation
64 Hardware Installation Guide