Figure 98. Installing the status LED control panel for Rear Accessed configuration
4. Align and insert the left ear handle in the slot on the system and tighten the screws using Torx 8 screwdriver.
Figure 99. Installing the left ear handle for Rear Accessed configuration
Next steps
1.
Install the expansion card riser 1
.
2.
Install the processor and heat sink module
.
3.
.
4. Follow the procedure listed in the
After working inside your system
.
Removing the power button control panel for Rear Accessed
configuration
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Vor der Arbeit an Komponenten im Inneren Ihres Systems
.
3.
Remove the processor air shroud
.
4.
Remove the expansion card riser 1
.
Installieren und Entfernen von Systemkomponenten
101
