![background image](http://html.mh-extra.com/html/dell/emc-poweredge-t150/emc-poweredge-t150_installation-and-service-manual_80253065.webp)
Figure 57. system board connector location
Next steps
1. Replace the following:
a.
NOTE:
The TPM must be replaced only while installing a new system board.
NOTE:
The TPM plug-in module is attached to the system board and cannot be removed. A replacement TPM
plug-in module is provided for all system board replacements, where a TPM plug-in module was installed.
b.
c.
d.
e.
Internal USB card, if installed
f.
, if installed
2. Replace the iDRAC MAC address label from the system with the new iDRAC MAC address label that came with the
replacement system board.
3. Reconnect all cables to the system board.
Installing and removing system components
65