f. Enter the System Setup and if the time and date are still incorrect, see
section.
Intrusion switch
This is a service technician replaceable part only.
Removing the intrusion switch
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Disconnect the intrusion switch cable from the connector on the system board.
2. Slide and push the intrusion switch out of the intrusion switch slot on the system.
Figure 52. Removing the intrusion switch
Next steps
.
Installing the intrusion switch
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Align the intrusion switch to the intrusion switch slot and slide the intrusion switch to lock in place.
60
Installing and removing system components
