Dell Embedded Box PC 5000, Service Manual

Page: 55 / 115

Replacing the WLAN-antenna
connectors
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC .
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC . For more safety best practices,
see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Insert the WLAN-antenna connectors into the WLAN-antenna connector
slots on the bottom cover.
NOTE: Insert the WLAN-antenna connectors based on the color
indicated behind the bottom cover.
2 Replace the nuts and washers that secure the WLAN-antenna connectors
to the bottom cover.
3 Route the WLAN cables through the routing guides on the chassis.
4 Connect the WLAN-antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the
WLAN card supported by the Embedded Box PC.
Connectors on the WLAN card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
Post-requisites
1 Replace the PCI/PCIe card (if necessary).
2 Follow step 2 to step 9 in “ Replacing the back cover ”.
55