Dell Embedded Box PC 5000, Service Manual

Page: 28 / 115

Replacing the drives in to the
hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC .
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC . For more safety best practices,
see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.
Procedure
NOTE: If the Embedded Box PC is shipped with two drives, the bottom
drive has to be replaced first. For more information see, Procedure to
replace bottom drive .
1 Insert the drive into the hard-drive cage.
2 Align the screw holes on the drive with the screw holes on the hard-drive
cage.
3 Replace the screws that secure the hard drive to the hard-drive cage.
Procedure to replace bottom drive
1 Insert the bottom drive into the bottom slot on the hard-drive cage and
push it down into place.
2 Align the screw holes on the bottom drive with the screw holes on the
hard-drive cage.
3 Replace the screws that secure the bottom drive to the hard-drive cage.
Post-requisites
Follow step 2 to step 8 in “ Replacing the back cover ”.
28