Input Color
Format
Allows you to set the video input mode to:
•
RGB
: Select this option if your monitor is connected to
a computer or DVD player using the DP adapter.
•
YPbPr
: Select this option if your DVD player supports
only YPbPr output.
Reset Color
Resets your monitor's color settings to the factory defaults.
Display
Use the
Display
menu to adjust the monitor's display settings.
Aspect Ratio
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.
NOTE
: Wide 16:9 adjustment is not required at maximum preset
resolution 1920 x 1080.
Horizontal
Position
Use or the buttons to adjust image left and right. Minimum is
'0' (-). Maximum is '100' (+).
Vertical
Position
Use the or buttons to adjust image up and down. Minimum
is '0' (-). Maximum is '100' (+).
NOTE
: Horizontal Position and Vertical Position adjustments are
only available for “VGA” input.
Sharpness
This feature can make the image look sharper or softer. Use or
to adjust the sharpness from '0' to '100'.
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your
monitor according to your preference. Use or buttons to
adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment,
use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
NOTE
: Pixel Clock and Phase adjustment are only available for
VGA input.
Response Time
Allows you to set the Response Time to
Normal
or
Fast
.
Reset Display
Select this option to restore default display settings.
