Electrical Specifications
Model number
E2318H
E2318HN / E2318HX /
E2318HR
Video input signals
•
Analog RGB: 0.7 Volts
± 5 %, 75 ohm input
impedance
•
DisplayPort, 600mV for
each differential line, 100
ohm input impedance per
differential pair
•
Analog RGB: 0.7 Volts
± 5 %, 75 ohm input
impedance
•
HDMI, 600 mV for each
differential line, 100 ohm
input impedance per
differential pair
Synchronization input
signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage /
frequency / current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.0 A (typical)
Inrush current
120 V: 30 A (Max.)
240 V: 50 A (Max.)
Power Consumption
0.2 W (Off Mode)
1
0.3 W (Standby Mode)
1
12.9 W (On Mode)
1
20 W (Max)
2
11.99 W (P
on
)
3
37.39 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components, and peripherals you
ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or completeness is
expressed or implied.
NOTE: This monitor is ENERGY STAR certified .
This product qualifies for ENERGY STAR in the factory default
settings which can be restored by “Factory Reset” function
in the OSD menu. Changing the factory default settings or
enabling other features may increase power consumption that
could exceed the ENERGY STAR specified limit.
