Removing and Installing Parts: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
1 alignment bar
2 fully seated card
3 not fully seated card
4 alignment guide
5 bracket within slot
6 bracket caught outside of slot
10. Ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
11. If previously removed, snap the card retention mechanism into place, securing the x16 PCI card.
1 card retention door
2 card retention mechanism
3 release tabs (2)
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into the computer.
12. Replace the computer cover (see
Replacing the Computer Cover
).
