76
Solving Problems
www
.dell.com | support.dell.com
Video and Display Problems
If the display is blank
NOTE:
If you are using a program that requires a higher resolution than your computer supports, it is
recommended that you attach an external monitor to your computer.
A
REQUIRED
. D L L
FILE
WAS
NOT
FOUND
—
The program that you are trying to
open is missing an essential file. Remove and then reinstall the program.
1
Click the
Start
button.
2
Click
Control Panel
.
3
Click
Add or Remove Programs
.
4
Select the program you want to remove.
5
Click
Remove
or
Change/Remove
and follow the prompts on the screen.
6
See the program documentation for installation instructions.
X
: \
IS
NOT
ACCESSIBLE
. T
HE
DEVICE
IS
NOT
READY
—
Insert a disk into the
drive and try again.
C
HECK
THE
LIGHT
—
When the
light is blinking, the computer has
power.
• If the
light is blinking, the computer is in standby mode—press the
power button to exit standby mode.
• If the
light is off, press the power button.
• If the
light is on, your power management settings may have caused the
display to turn off. Try pressing any key or move the cursor to exit
standby mode.
C
HECK
THE
BATTERY
—
If you are using a battery to power your computer, the
battery charge may be depleted. Connect the computer to an electrical outlet
using the AC adapter, and turn on the computer.
T
EST
THE
ELECTRICAL
OUTLET
—
Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
C
HECK
THE
A C
ADAPTER
—
Check the AC adapter cable connections. If the
AC adapter has a light, ensure that it is on.
G2806bk2.book Page 76 Tuesday, May 25, 2004 8:48 AM