Dell Dimension 9100 Owner'S Manual Download Page 121

Page: 121 / 162

Adding and Replacing Parts

121

Card with Bluetooth

Wireless Technology

CAUTION:

Before you perform the following procedures, read and follow the safety instructions at the

front of this document (see page 9).

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To avoid damaging the system board, you must remove the main battery before you begin

working inside the computer.

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Remove the battery (see page 42).

Open the card door.

Pull the module out of the compartment so that you can disconnect the card from its cable
and remove it from the computer.

card

card connector

card door

G2806bk2.book Page 121 Tuesday, May 25, 2004 8:48 AM

Summary of Contents for Dimension 9100



































































































































































Search results

Summary of Contents for Dimension 9100

Reviews:

Related manuals for Dimension 9100

Brands by name

Popular brands

Dell Dimension 9100, Owner'S Manual

Search results

Summary of Contents for Dimension 9100

Reviews:

Related manuals for Dimension 9100

Brands by name

Popular brands