Dell D14S003, Service Manual

Page: 38 / 56

Replacing the power-button module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Procedure
• Post-requisites
Procedure
1. Route the power-button board cable through the slot on the front panel.
2. Align and snap the power-button module into the slot on the front panel.
3. Connect the power-button board cable to the system board.
4. Rotate the front I/O-bracket towards the chassis.
5. Align the screw hole on the front I/O-bracket with the screw hole on the chassis.
6. Replace the screw (#6-32xL6.35) that secures the front I/O bracket to the chassis.
NOTE: Black screw is used to prevent light leakage.
Post-requisites
1. Follow the procedure from step 4 to step 8 in “ Replacing the optical drive ”.
2. Replace the front bezel .
3. Replace the computer cover .
23
38 Replacing the power-button module