Replacing the memory module
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Topics:
•
•
Replacing the power-button module
Procedure
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module into the memory-module slot.
3. Press the memory module down until it clicks into place and the securing clips are in locked position.
Replacing the power-button module
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Procedure
1. Route the power-button board cable through the slot on the front panel.
2. Align and snap the power-button module into the slot on the front panel.
3. Connect the power-button board cable to the system board.
4. Rotate the front I/O-bracket towards the chassis.
5. Align the screw hole on the front I/O-bracket with the screw hole on the chassis.
6. Replace the screw (#6-32xL6.35) that secures the front I/O bracket to the chassis.
NOTE:
Black screw is used to prevent light leakage.
15
Replacing the memory module
27