manualshive.com logo in svg

Dell BigIron RX Series, Configuration Manual

Share
Download
Dell BigIron RX Series Configuration Manual Download Page 86

10

BigIron RX Series Configuration Guide

53-1002253-01

Searching and filtering output

1

Displaying lines containing a specified string
The following command filters the output of the show interface command for port 3/11 so it 
displays only lines containing the word “Internet”.  This command can be used to display the IP 
address of the interface.

BigIron RX# show interface e 3/11 | include Internet

 Internet address is 192.168.1.11/24, MTU 1518 bytes, encapsulation ethernet

Syntax: <show-command> | include <regular-expression>

NOTE

The vertical bar ( | ) is part of the command.

Note that the regular expression specified as the search string is case sensitive.  In the example 
above, a search string of “Internet” would match the line containing the IP address.

Displaying lines that do not contain a specified string
The following command filters the output of the show who command so it displays only lines that 
do not contain the word “closed”. This command can be used to display open connections to the 
Brocade device.

BigIron RX# show who | exclude closed

Console connections:

        established

        you are connecting to this session

        2 seconds in idle

Telnet connections (inbound):

 1      established, client ip address 192.168.9.37

        27 seconds in idle

Telnet connection (outbound):

SSH connections:

Syntax: <show-command> | exclude <regular-expression>

Displaying lines starting with a specified string
The following command filters the output of the show who command so it displays output starting 
with the first line that contains the word “SSH”. This command can be used to display information 
about SSH connections to the device.

BigIron RX# show who | begin SSH

SSH connections:

 1      established, client ip address 192.168.9.210

        7 seconds in idle

 2      closed

 3      closed

 4      closed

 5      closed

Syntax: <show-command> | begin <regular-expression>

Searching and filtering output at the --More-- prompt

The --More-- prompt is displayed when output extends beyond a single page.  From this prompt, you 
can press the Space bar to display the next page, the Return or Enter key to display the next line, or 
Ctrl-C or Q to cancel the display.  You can also search and filter output from this prompt.  

Summary of Contents for BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands