Dell BigIron RX Series, Configuration Manual

Page: 173 / 1458

BigIron RX Series Configuration Guide 97
53-1002253-01
Configuring TACACS and security
4
Syntax: ip tacacs source-interface ethernet <portnum> | loopback <num> | ve <num>
The <num> parameter is a loopback interface or virtual interface number. If you specify an
Ethernet, the <portnum> is the port’s number (including the slot number, if you are configuring a
device).
Displaying TACACS and statistics and
configuration information
The show aaa command displays information about all and RADIUS servers identified on
the device.
Syntax: show aaa
The following table describes the TACACS and information displayed by the show aaa
command.
TABLE 37
Output of the show aaa command for TACACS and
Field Description
key The setting configured with the tacacs-server key command. At the Super User
privilege level, the actual text of the key is displayed. At the other privilege levels, a
string of periods (....) is displayed instead of the text.
retries The setting configured with the tacacs-server retransmit command.
timeout The setting configured with the tacacs-server timeout command.
dead-time The setting configured with the tacacs-server dead-time command.
BigIron RX# show aaa
key: brocade
retries: 1
timeout: 15 seconds
dead-time: 3 minutes
Server: 207.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius dead-time: 3 minutes
Radius Server: 207.95.6.90 Auth Port=1645 Acct Port=1646:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection