Dell Alienware M11x R3 Manual Download

Page: 36 / 118

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

Function Keys

NOTE:

Depending on the configuration of the laptop you purchased, some of the function

keys may have no associated tasks.

The <Fn> key is located near the bottom-left corner of the keyboard, and is used together with
other keys to activate certain functions. Hold down the <Fn> key along with the key described

below:

F1 — Extend Desktop

Press <Fn><F1> to open the screen resolution panel to extend your desktop to an

external monitor and also change the display settings.

F2 — Check Battery Status

Press <Fn><F2> to manage the power setting using the AlienFusion software

available in the Alienware Command Center (for more information, see “Alienware

Command Center” on page 38).

F3 — Wireless Control - Switch wireless radios on/off

Press <Fn><F3> to enable or disable the wireless radios(s) (for more information,

see “Using the Wireless Control” on page 44).

F4 — Increase Display Brightness

Press <Fn><F4> to increase the brightness of the display.

Summary of Contents for Alienware M11x R3























































































































Search results

Summary of Contents for Alienware M11x R3

Reviews:

Related manuals for Alienware M11x R3

Brands by name

Popular brands

Dell Alienware M11x R3, Manual

Search results

Summary of Contents for Alienware M11x R3

Reviews:

Related manuals for Alienware M11x R3

Brands by name

Popular brands