Replacing the Power-
Adapter Port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer
.
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Connect the power-adapter port cable to the system board.
2
Turn the system board over.
3
Replace the screws that secure the system board to the computer base.
4
Connect the speaker cable to the connector on the system board.
5
Align the power-adapter port to the computer base.
6
Align the screw hole on the power-adapter port bracket with the screw
hole on the power-adapter port.
7
Replace the screw that secures the power-adapter port bracket to the
power-adapter port.
Post-requisites
1
Replace the
display assembly
.
2
Follow the procedure from step 5 to step 9 in “Replacing the
palm rest
”.
3
Follow the procedure from step 3 to step 7 in “Replacing the
solid-state
drive
” .
4
Replace the
base panel
.
67
Summary of Contents for Alienware 13
