Dell 964 All In One Photo Printer, Owner'S Manual

Page: 54 / 136

54 Faxing
w
w
w
.d
el
l.
c
o
m
|
s
upp
ort
.del
l.
com
Connecting to a computer modem
1
Connect a phone cord from the FAX connector ( — left side connector) on the printer
to the telephone wall jack.
2
Remove the protective plug from the PHONE jack connector ( — right side connector)
on the back of the printer.
3
Connect a phone cord from the telephone to the computer modem.
4
Connect a phone cord from the computer modem to the PHONE jack connector ( —
right side connector) on the printer.
NOTE: If the phone communication is serial in your country (such as Germany, Sweden, Denmark,
Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the right
connector ( ), and insert the supplied yellow terminator for your fax to work correctly. You will not
be able to use this port for additional devices in these countries.
What if I Have a Digital Subscriber Line (DSL)?
DSL delivers digital data to a computer through a telephone line. Your Dell Photo AIO Printer
964 is designed to work with analog data. If you are faxing over a telephone line connected to a
DSL modem, install a DSL filter to avoid interference with the analog fax modem signal.
1
Connect the DSL filter to an active telephone line.
2
Connect the printer directly to the output of the DSL filter.
NOTE: Do not install any splitters between the DSL filter and the printer. Contact your DSL service
provider if you need more help.