Dell 7330 Service Manual Download Page 46

Page: 46 / 126

Table 4. Connectors on the WWAN card

Antenna

Cable Color

Main (white triangle)

White and Grey (cable number 5)

Auxiliary (black triangle) - ANT1

White and Black (cable number 6)

Auxiliary (black triangle) - ANT3

Blue (cable number 8)

Auxiliary (black triangle) - ANT2

Orange (cable number 7)

4. Slide and remove the WWAN card from the WWAN card slot.

Installing the WWAN card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the WWAN card and provides a visual representation of the installation procedure.

Steps

1. Slide the WWAN card at an angle into the WWAN card slot.
2. Connect the antenna cables to the WWAN card.

Removing and installing components

Summary of Contents for 7330































































































































Search results

Summary of Contents for 7330

Reviews:

Related manuals for 7330

Brands by name

Popular brands

Dell 7330, Service Manual

Search results

Summary of Contents for 7330

Reviews:

Related manuals for 7330

Brands by name

Popular brands