Removing the Memory Module From DIMM B
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over, loosen the captive screw in the memory module cover, and then remove the cover.
3.
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
4.
Remove the module from the connector.
Installing the Memory Module
NOTICE:
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM B" before you install a
module in the connector labeled "DIMM A."
1
captive screw
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
NOTICE:
Handle memory modules by their edges, and do not touch the components on a module.
NOTE:
If you are replacing a memory module, remove the existing module.
Summary of Contents for 610D
Page 19: ...Back to Contents Page ...
Page 34: ......
Page 37: ......
Page 40: ...Back to Contents Page ...
