Back to Contents Page
Keyboard
Dell™ Latitude™ D610 Service Manual
Removing the Keyboard
Installing the Keyboard
Removing the Keyboard
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the center control cover (see "
Removing the Center Control Cover
").
3.
Remove the two M2.5 x 5-mm screws across the top of the keyboard.
4.
Lift and rotate the keyboard clockwise 90 degrees to access the pull-tab.
5.
Using the keyboard cable pull-tab, pull up to disconnect the keyboard cable connector from the keyboard connector on the system board.
6.
Remove the keyboard (see "
Removing the Keyboard
").
Installing the Keyboard
1.
Connect the keyboard cable connector to the keyboard connector on the system board.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
When you remove the keyboard, pull up gently to avoid damaging the keyboard cable.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
NOTE:
When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.
1
M2.5 x 5-mm screws (2)
2
keyboard cable pull-tab
3
keyboard connector on system board
4
keyboard tabs (5)
5
palm rest
Summary of Contents for 610D
Page 19: ...Back to Contents Page ...
Page 34: ......
Page 37: ......
Page 40: ...Back to Contents Page ...
