Replace the card retention bracket ensuring that:
l
The guide clamp is aligned with the guide notch.
l
The tops of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
Back to Contents Page
1
alignment guide
2
filler bracket
3
alignment bar
4
card retention bracket
5
guide clamps (2)
6
guide notchs (2)
NOTE:
For information on location of connectors, see the
Setup Guide.
For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Installed
Removed
Sound Card
1.
Enter system setup (see
System Setup
).
2.
Go to
Integrated Peripherals
and select
Onboard Audio Controller
, and then
change the setting to
Disabled
.
3.
Connect the external audio devices to the sound card's connectors.
1.
Enter system setup (see
System Setup
).
2.
Go to
Integrated Peripherals
and select
Onboard Audio Controller
change the setting to
Enabled
.
3.
Connect the external audio devices to the computer's back panel connectors.
Network
Card
1.
Enter system setup (see
System Setup
).
2.
Go to
Integrated Peripherals
and select
Onboard LAN Controller
, and then
change the setting to
Disabled
.
3.
Connect the network cable to the network card's connector.
1.
Enter system setup (see
System Setup
).
2.
Go to
Integrated Peripherals
and select
Onboard LAN Controller
change the setting to
Enabled
.
3.
Connect the network cable to the integrated network connector.
Summary of Contents for 540 - USB Photo Printer 540
Page 11: ......
Page 25: ...Back to Contents Page ...
