If the Device Security Screw Is Not Installed
1.
Press the device latch release so that the latch release pops out.
2.
Pull the device by the latch release to remove the device from the module bay.
3.
Push the new device into the bay until it clicks.
If the Device Security Screw Is Installed
1.
Save and close any open files, exit any open programs, and shut down the computer.
2.
If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
3.
Close the display and turn the computer upside down.
4.
Use a #1 Phillips screwdriver to remove the optical device security screw from the bottom of the computer.
NOTE:
You do not need to install the device security screw unless you want to keep the module inside the computer for security purposes.
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1 device latch release
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
