7.
Use the touch pad connector tab to disconnect the touch pad connector from the system board.
8.
Starting at the back center of the palm rest, use your fingers to separate the palm rest from the computer base by gently lifting up the palm rest while
pressing down on the back of the computer base.
Back to Contents Page
1 M2.5 x 5-mm screws labeled "P" (4)
1 touch pad connector
2 system board connector
NOTICE:
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
NOTE:
When you reinstall the palm rest, attach the right side of the palm rest first and ensure that the modem ends of the antennae cables are visible
in the PCI card compartment on the base of the computer.
