5.
Remove the display panel.
6.
Remove the M2 x 4-mm screw that secures the support bracket to the top cover.
7.
Lift the support bracket out of the top cover, and then remove the display latch.
Back to Contents Page
NOTICE:
A strip of copper foil may be present beneath the support bracket on some systems; ensure that you
do not
tear this foil while removing the
bracket.
NOTE:
Ensure that the support bracket is upright when you replace the display latch.
1 top cover
2 M2 x 4-mm screw (1)
3 support bracket
4 display latch
