Removing the Computer Base
1.
Follow the instructions in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board Assembly
).
3.
Remove the wireless sniffer board (see
Removing the Wireless Sniffer Board
).
4.
Remove the audio connector board (see
Removing the Audio Connector Board
).
5.
Remove the CIR board (see
Removing the CIR Board
).
6.
Remove the USB connector board (see
Removing the USB Connector Board
).
7.
Remove the speaker assembly (see
Removing the Speaker Assembly
).
Replacing the Computer Base
1.
Replace the speaker assembly (see
Replacing the Speaker Assembly
).
2.
Replace the USB connector board (see
Replacing the USB Connector Board
.
3.
Replace the CIR board (see
Replacing the CIR Board
).
4.
Replace the audio connector board (see
Replacing the Audio Connector Board
).
5.
Replace the wireless sniffer board (see
Replacing the Wireless Sniffer Board
).
6.
Complete the replacement of the computer base by following the procedures in
Replacing the System Board Assembly
.
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTE:
When removing the system board to replace the computer base, it is not necessary to remove the processor, memory, or Mini-Card.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTICE:
Ensure that the rubber gasket is installed in the appopriate location for your processor. The gasket can be moved as needed.
1 location for Intel processor 2 rubber gasket
3 location for AMD processor
Summary of Contents for 1700 - Personal Laser Printer B/W
Page 21: ......
Page 43: ...Back to Contents Page ...
