Back to Contents Page
Graphics Card Assembly
Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual
Removing the Graphics Card Assembly
Replacing the Graphics Card Assembly
Removing the Graphics Card Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the optical drive (see
Removing the Optical Drive
).
3.
Remove the hard drive (see
Removing a Hard Drive
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Bluetooth Card
).
8.
Remove the palm rest (see
Removing the Palm Rest
).
9.
In sequential order, loosen the three captive screws that secure the graphics card assembly to the system board, then carefully lift the assembly out of
the computer.
Replacing the Graphics Card Assembly
1.
Align the three captive screws on the graphics card assembly assembly with the screw holes on the system board.
2.
In sequential order, tighten the three captive screws to secure the graphics card assembly assembly to the system board.
3.
Replace the palm rest (see
Replacing the Palm Rest
).
4.
Replace the internal card with Bluetooth wireless technology, if installed (see
Replacing the Bluetooth Card
).
NOTE:
The graphics card assembly is available only on the Vostro 1700 (standard) and the Inspiron 1720 (optional).
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
1 graphics card assembly 2 captive screws (3)
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
Summary of Contents for 1700 - Personal Laser Printer B/W
Page 21: ......
Page 43: ...Back to Contents Page ...
