Dell 1600n - Multifunction Laser Printer B/W, Service Manual

Page: 50 / 189

Precautions
Service Manual
5-7
11. Remove the CCD Cable, as shown below.
12. Pull up the CCD Shaft and take out the Scanner
Module.
13. Push the Belt Holder and take out the Belt, as shown
below.
14. Remove the Reduction Gear and Idle Gear, as
shown below.
Scanner Module
CCD Cable
CCD Shaft
Belt
Spring
Gear-Reduction
Gear-Timing
Caution :
Assembling Scanner Module
When assembling the scanner module,
the belt and the belt Spring, the belt
spring must be located on the right side
of the scanner module and the parts
should be put as close to each other as
possible as shown below.