Dell 1545 - Inspiron - Pentium 2 GHz Service Manual Download Page 49

Page: 49 / 51

Back to Contents Page

Dell™ Inspiron™ 1545 Service Manual

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

Inspiron

, and the

DELL

logo are trademarks of Dell Inc.;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell

under license;

Microsoft

Windows, Windows Vista, and Windows Vista start button logo

are either trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

February 2009 Rev. A01

Back to Contents Page

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for 1545 - Inspiron - Pentium 2 GHz




















































Search results

Summary of Contents for 1545 - Inspiron - Pentium 2 GHz

Reviews:

Related manuals for 1545 - Inspiron - Pentium 2 GHz

Brands by name

Popular brands

Dell 1545 - Inspiron - Pentium 2 GHz, Service Manual

Search results

Summary of Contents for 1545 - Inspiron - Pentium 2 GHz

Reviews:

Related manuals for 1545 - Inspiron - Pentium 2 GHz

Brands by name

Popular brands