Back to Contents Page
Charger Board
Dell™ Inspiron™ 1545 Service Manual
Removing the Charger Board
Replacing the Charger Board
Removing the Charger Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board
).
3.
Remove the two screws that secure the charger board to the computer base.
4.
Lift the charger board out of the computer base.
Replacing the Charger Board
1.
Place the charger board in the computer base.
2.
Replace the two screws that secure the charger board to the computer base.
3.
Replace the system board (see
Replacing the System Board
).
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not
covered by your warranty.
1
charger board
2
screws (2)
