Dell EMC XC Core XC6515, Installation And Service Manual

Page: 121 / 159

NOTE: Route the cable properly to prevent the cable from being pinched or crimped.
2. Align and insert the left control panel assembly in the slot on the system.
3. Using the Phillips #1 screwdriver, tighten the screws that secure the left control panel assembly.
4. Using the Phillips #1 screwdriver, tighten the screws to secure the cable cover to the system.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 94. Installing the left control panel
Next steps
1. Replace the air shroud .
2. Install the backplane cover
3. Close and secure the cable guiding latch.
4. Follow the procedure listed in the
After working inside your system .
Remove the right control panel
Prerequisites
• Follow the safety guidelines listed in the Safety instructions .
• Follow the procedure listed in the Before you work inside your system .
• If applicable, Remove the drive backplane cover
• Remove the air shroud .
• Lift the cable guiding latch.
Steps
1. Using the Phillips #1 screwdriver, remove the screws that secure the cable cover and lift the cover away from the system.
Installing and removing system components 121