4. Push the latch down until it locks into place
The activity light flashes to indicate that the spin-up sequence has begun.
Figure 28 Installing a 2.5" disk
Verifying the operation of the new part in Unisphere
Verify that the new part is recognized by your system, and operating correctly.
Procedure
1. In Unisphere, select System View.
2. On the Summary page, confirm that the system status is OK.
3. Select the Enclosures page.
4. Verify that the part appears with the OK status in the enclosure view. You may
need to refresh Unisphere by clicking on the refresh icon next to the
Enclosures view.
If the system health monitor shows the part as faulted, contact your service
provider.
Returning a faulted part
We appreciate the return of defective material within 5 business days (for US
returns). For International customers, please return defective material within 5-10
business days. All instructions and material required to return your defective part were
supplied with your good part shipment.
Procedure
1. Package the faulted part in the shipping box that contained the replacement
part, and seal the box.
2. Ship the failed part to your service provider as described in the instructions that
were included with the replacement part.
3. (Optional) For more information about returning customer-replaceable parts,
from Unisphere, click Support
>
Replace Disk Drives, Power Supplies, and
Other Parts
>
Return a Part to display the part return instructions.
If your screen does not show the Return a Part option, contact your service
provider for instructions on what to do next.
Service Procedures
Verifying the operation of the new part in Unisphere
43
