5
Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink.
NOTE:
•
Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
•
Do not press on the heat sink fins.
•
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the heat
sink onto the processor and bracket.
Figure 43. Installing the heat sink onto the processor
Next steps
1
Install the processor and heat sink module
.
2
3
Follow the procedure listed in
After working inside your enclosure
.
94
Installing and removing enclosure components
Summary of Contents for PowerEdge C6420
