Table 3. Ethernet port indicator codes
Convention
Status
Condition
A
Link and activity indicators are off
The NIC is not connected to the network.
B
Link indicator is green
The NIC is connected to a valid network at its
maximum port speed.
C
Link indicator is amber
The NIC is connected to a valid network at less than
its maximum port speed.
D
Activity indicator is flashing green
Network data is being sent or received.
Sled to hard drive mapping
Figure 6. Sled to drive mapping for the enclosure with 24 x 2.5-inch drives
1
Drives 0–5 mapped to sled 1
2
Drives 6–11 mapped to sled 2
3
Drives 12–17 mapped to sled 3
4
Drives 18–23 mapped to sled 4
5
(Optional) NVMe hard drive location
Figure 7. Sled to drive mapping for the enclosure with 12 x 3.5-inch drives
1
Drives 0–2 mapped to sled 1
2
Drives 3–5 mapped to sled 2
3
Drives 6–8 mapped to sled 3
4
Drives 9–11 mapped to sled 4
NOTE:
The warranty of the drives are linked to the Service Tag of the corresponding sled.
Expander zoning
A SAS expander board allows higher, single-volume hard drive configurations. An integrated expander device expands each sleds hard drive
footprint.
The Dell EMC PowerEdge C6400 enclosure allows four sleds to access a single expander controller at the same time. there are two zoning
options available, they are:
12
Dell EMC PowerEdge C6420 overview
Summary of Contents for PowerEdge C6420
