Figure 64. Installing a GPU riser cable from the system board
1
connector on the GPU riser cable board
2
GPU riser cable board
3
GPU riser cable
4
screw (3)
5
GPU riser cable clip
6
GPU
NOTE:
Do not hold the GPU by the GPU riser cable board.
Next step
1
Connect the power cables to the GPU.
Installing a GPU
Your system supports up to four GPUs.
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the GPU installation guidelines listed in
.
3
Install the GPU brackets.
4
Install the GPU riser cable board.
Steps
1
Lower the front of the GPU at an angle and slide it to engage the slots on the GPU with the guide pins on the front inner wall of the
chassis.
NOTE:
Do not hold the GPU by the GPU riser cable board.
CAUTION:
While installing the GPU, ensure that the guide pins on the chassis do not scrape the GPU.
2
Lower the back of the GPU to engage the guide holes on the GPU with the guide pins on the chassis.
3
Connect the GPU power cables to the GPU and the system board or the switch board.
108
Installing and removing system components