Dell EMC P92F Page 46 Service Manual Download | Manualshive

Page: 46 / 60

background image

Steps

1. Remove the two screws (M2x4) that secure the display-assembly cable bracket to the system board.
2. Lift the display-assembly cable bracket off the system board.
3. Disconnect the camera cable and the display cable from the system board.
4. Remove the two screws (M2x4) that secure the USB Type-C port bracket to the palm-rest and keyboard assembly.
5. Peel off the Mylar tape that secures the woofer cable and the speaker cable to the system board.
6. Open the latch and disconnect the power-button cable from the system board.
7. Open the latch and disconnect the woofer cable from the system board.
8. Disconnect the speaker cable from the system board.
9. Disconnect the keyboard cable from the system board.
10. Remove the two screws (M2x4) that secure the USB Type-C port bracket to the palm-rest and keyboard assembly.
11. Peel off the mylar that secures the woofer cable and the speaker cable to the system board.
12. Remove the screw (M2x4) that secures the wireless-card bracket to the system board.
13. Open the latch and disconnect the woofer cable from the system board.
14. Disconnect the antenna cables from the wireless card.
15. Disconnect the speaker cable from the system board.
16. Remove the three screws (M2x4) that secure the system board to the palm-rest and keyboard assembly.
17. Lift the system board off the palm-rest and keyboard assembly.

46

Disassembly and reassembly

«
...
44
45
46
47
48
...
»

Summary of Contents for P92F





























































Reviews:

No comments

Related manuals for P92F

Brand: Samsung Pages: 145

Brand: Fluidwell Pages: 52

Brand: Olivetti Pages: 118

AIMB-T1217 Series

Brand: Advantech Pages: 32

Brand: Markant Pages: 11

Brand: Advantech Pages: 68

Brand: Avid Technology Pages: 19

Dimension XPS H233

Brand: Dell Pages: 89

Dimension XPS R Series

Brand: Dell Pages: 94

DIMENSION XPS GEN 3 WHL

Brand: Dell Pages: 144

Inspiron 14 5415

Brand: Dell Pages: 21

Brand: Dell Pages: 35

Inspiron 14 5410

Brand: Dell Pages: 14

Brand: Dell Pages: 8

Brand: Dell Pages: 45

Brand: Dell Pages: 85

Brand: Dell Pages: 47

Brand: Dell Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands