Dell EMC P92F Page 24 Service Manual Download | Manualshive

Page: 24 / 60

background image

About this task

NOTE:

This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in the SSD1 slot.

NOTE:

Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2

2280 solid-state drive in the SSD1 slot.

The following image indicates the location of the M.2 2280 solid-state drive that is installed in SSD1 slot and provides a visual
representation of the removal procedure.

Steps

1. Remove the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board.
2. Lift the thermal plate off the system board.
3. Slide and lift the solid-state drive off the SSD1 slot.

Installing the M.2 2280 solid-state drive in the SSD1 slot

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE:

This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in the SSD1 slot.

NOTE:

Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2

2280 solid-state drive in the SSD1 slot.

NOTE:

Install the solid-state drive mounting bracket, if it is not installed.

The following image indicates the location of the M.2 2280 solid-state drive that is installed in SSD1 slot and provides a visual
representation of the installation procedure.

24

Disassembly and reassembly

«
...
22
23
24
25
26
...
»

Summary of Contents for P92F





























































Reviews:

No comments

Related manuals for P92F

Brand: IBM Pages: 48

Brand: Samsung Pages: 145

Brand: quanergy Pages: 2

Brand: ADLINK Technology Pages: 76

Brand: Gigabyte Pages: 34

Brand: Gateway Pages: 144

Aqua Compact Pro

Brand: DIGITAL YACHT Pages: 5

Brand: Vivo Pages: 16

VAIO PCV-RX470DS

Brand: Sony Pages: 101

Brand: Giada Pages: 41

Brand: Allen-Bradley Pages: 34

Brand: Moxa Technologies Pages: 2

Brand: Paragon Pages: 2

Brand: AOpen Pages: 1

Brand: AOpen Pages: 21

Brand: AOpen Pages: 24

Brand: Daikin Pages: 20

UniWorkstation 5548

Brand: Univide Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands