Dell EMC Latitude 3510, Setup And Specifications Manual

Page: 39 / 43

Table 42. Performance(continued)
adjust processor voltage and core frequency, decreasing average
power consumption and heat production.
C-States Control
Enable C-States Control
This field contains a toggle switch to enable or disable C-States
Control that configures the CPU's ability to enter and exit low
power states. When off, it disables all C-States.
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
This field allows the user to enable or disable Intel Turbo Boost
Technology.
• Disabled - Does not allow the Intel Turbo Boost Technology
driver to increase the performance state of the processor
above the standard performance.
• Enabled - Allows the Intel Turbo Boost Technology to increase
the performance of the CPU or graphics processor.
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
This field allows the user to configure this feature where the
processor resources are used more effectively, enabling multiple
threads to run on each core.
System Logs
This section contains BIOS, Thermal and Power event logs.
Table 43. System Logs
Options Description
BIOS Event Log
Clear BIOS Event log
This field contains a toggle switch to Keep or Clear BIOS Event
logs. It also lists all saved events(Date, Time, Message).
Thermal Event Log
Clear Thermal Event Log
This field contains a toggle switch to Keep or Clear Thermal Event
logs. It also lists all saved events(Date, Time, Message).
Power Event Log
Clear Power Event Log
This field contains a toggle switch to Keep or Clear Power Event
logs. It also lists all saved events(Date, Time, Message).
Updating the BIOS in Windows
Prerequisites
It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available. For laptops,
ensure that your computer battery is fully charged and connected to a power before initiating a BIOS update.
About this task
NOTE: If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re enabled after the
BIOS update is completed.
System setup 39