Table 32. Storage
Options
Description
SATA Operation
SATA Operation
This section allows the user to select the operating mode of the
integrated SATA hard drive controller. The following options are
available here:
•
Disabled - SATA controllers are disabled.
•
AHCI - SATA is configured in AHCI mode.
•
RAID On - SATA is setup to support RAID (Intel Rapid Storage
Technology).
Storage Interface
Port Enablement
This section allows the user to enable or disable the onboard drives
on the computer. The following options are available here:
•
SATA-0
•
M.2 PCIe SSD-0
SMART Reporting
Enable SMART Reporting
This section contains a toggle switch that allows the user to enable
or disable the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting
Technology) option on the system.
Drive Information
This section provides information about the connected and active
drives on the computer.The following options are available here:
•
SATA-0
○
Type
○
Device
•
M.2 PCIe SSD-0
○
Type
○
Device
Enable MediaCard
This section allows the user to switch all media cards On/Off, or
enable/disable the media card in read-state only. The options seen
are as below
•
Secure Digital(SD) Card
•
Secure Digital(SD) Card Read-Only Mode
Connection
This section provides connection details and settings.
Table 33. Connection
Options
Description
Wireless Device Enable
This section contains a toggle switch that allows the user to enable
or disable WLAN and Bluetooth on the computer. The options are
as follows:
•
WLAN
•
Bluetooth
Enable UEFI Network Stack
This section contains a toggle switch that allows the user to enable
or disable installation of UEFI networking protocols.
30
System setup