b)
5. Follow the procedure in
After working inside your computer
.
Solid state drive (SSD)
SSD bracket
Removing the SSD bracket
1.
NOTE:
This system has the option to fit two form factors (M.2 2242 and M.2 2230) SSD/eMMC cards. This is
achieved by removing, inverting, and installing the extender to an alternate location as marked on the palmrest.
Follow the procedure in
Before working inside your computer
.
2. Remove the :
a)
b)
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
5. Remove the two M2.0x3.0 screws securing the SSD bracket to the palmrest [1].
6. Remove the SSD bracket from the palmrest [2].
Figure 11. M.2 2230 SSD
Installing the SSD bracket
1. Install the SSD bracket in the palmrest [1].
2. Install the two M2.0x3.0 screws securing the SSD bracket to the palmrest [2].
38
ការលោះលប្រងង
និងែំលែប្ងលប្រងងលែប្ងែិញ
Summary of Contents for Latitude 3300
